The VLP10 Paint Dryer is the ideal model to compliment any existing full size drying system. Used with the optional stand, it also becomes an ideal additional heat source or spot drying unit. This model is intended for use on small repairs and drying jobs and is rated so it can easily be used for on-site repair works using a small generator. The heater comes ready fitted with the a short-wave lamp, offering the same high output as the full size models.

Features and Benefits

Built-in isolating switch

Fitted with 1Kw short-wave element

Pistol grip handle

Wide angle reflector

3m of flexible cable and 13A plug

Instant heat-up

This model is intended for use on small repairs and drying jobs.  For example engine drying ‑ stripe removal ‑ filler drying and pre heating prior to spraying.

The VLP10 comes ready fitted with the a short-wave infrared lamp offering the same high output as the full size models

Note: Does not incorporate a timer and is not designed to be left unattended.

Specification

Minimum Static operating distance – 500mm (When mounted on its stand)

Dimensions 600mm x 140mm x 85mm

Electrical specification 220/240 Volt 1KW 50Hz single phase

The post VLP10 1kW Hand-held Paint Dryer appeared first on Leisure Heating.

The VLP10 Paint Dryer and stand is the ideal model to compliment any existing full size drying system.  It is ideal for use on small repairs and drying jobs and is rated so it can easily be used for on-site repair works using a small generator. The heater comes ready fitted with the a short-wave lamp, offering the same high output as the full size models.  The stand has a surdy heavy base and the paint dryer is easily detatchable for use as a hand held dryer when neccessary.

Features and Benefits

Built-in isolating switch

Fitted with 350mm 1Kw short-wave element (replaceable)

Pistol grip handle

Wide angle reflector

3m of flexible cable and 13A plug

Sturdy metal stand with adjusable bracket

Instant heat-up

This model is intended for use on small repairs and drying jobs.  For example engine drying ‑ stripe removal ‑ filler drying and pre-heating prior to spraying.

Note: Does not incorporate a timer and is not designed to be left unattended.  Timers are available as an optional extra

Specification

Minimum Static operating distance – 500mm (When mounted on its stand)

Dimensions: Heater 600mm x 140mm x 85mm

Electrical specification 220/240 Volt 1KW 50Hz single phase

The post VLP10s Hand-held Paint Dryer and Stand appeared first on Leisure Heating.

The post 500W Replacement Gold Element for VLP15 Paint Dryer. 64245071 appeared first on Leisure Heating.

1.0kW Ruby-sleeved short-wave emitter. SK15 end caps and fly leads fitted with bare terminals. 230V – 240V. Overall length end to end 530mm. Used in several commercial infra-red paint dryers.

The post 1.0kW Replacement Element for HLP3000 Paint Dryer and similar appeared first on Leisure Heating.

1.5kW Ruby short-wave emitter. SK15 end caps and fly leads fitted with bare terminals 230V – 240V. The overall length end to end is 780mm. Used in several commercial infra-red paint dryers.

The post 1.5kW Replacement Element for HLP4500 Paint Dryer and similar appeared first on Leisure Heating.

This 0 – 99 minute Digital Timer is designed for use with up to TWO HLP1000 infra-red paint dryers.

It allows the user to set a time for the heater to switch off automatically when left unattended.

The timer is easily installed by clamping it to the stand of the paint dryer using the pracket provided.  The 13A plug on the existing paint dryer need to be removed and the plug(s) provided with the timer require fitting in its place.  Up to Two 1kW paint dryers can be used with this timer using the 2 sockets provided in the top of the timer. Two plugs are included with the timer.

Features and Benefits

Sturdy metal case

Digital count-down read-out

0 – 99 minutes setting available

Fitted with 13A plug

Built-in pole clamp

Specification

Max load 2kW 8.5A 220/240V

Dimensions: 115mm x 130mm x 65mm

The post HLP1000 Paint Dryer Digital Timer appeared first on Leisure Heating.

Double bracket for the Victory Heat Light HLP1000 or VLP10 paint dryer. Can be used in combination with an existing stand to enable you to mount two HLP1000 or VLP10 paint dryers to a single stand.

Specification

The bracket is designed to take two HLP1000 or two VLP10 hand-held Paint Dryers.

Minimum Static operating distance with heater fitted – 500mm (When mounted on its stand).

The post DOUBLE Tripod Bracket for HLP1000 and VLP10 Hand-held Paint Dryer appeared first on Leisure Heating.

Replacement/extra bracket for the Victory HeatLight HLP1000 or VLP10 paint dryer. Can be used in combination with an existing HLP1000s stand/heater combination to allow the addition of a second paint dryer to be attached to the same stand.

Bracket designed to take ONE HLP1000 or ONE VLP10 hand-held Paint Dryer.

Specification

Minimum Static operating distance with heater fitted – 500mm (When mounted on its stand).

The post EXTRA Stand Bracket for HLP1000 and VLP10 Paint Dryer appeared first on Leisure Heating.

1.0kW Ruby short-wave emitter. SK15 end caps and fly leads fitted with bare terminals. 230V – 240V. The overall length end to end is 350mm. Used in many quartz infra-red space heaters and infra-red paint dryers.

Modern alternative to Ruby SLEEVED elements which are generally being phased out.

The post 1kW Budget Priced Replacement Element for Paint Dryer appeared first on Leisure Heating.

The post 850W Replacement Element for Trisk Hotspot Paint Dryer appeared first on Leisure Heating.