This long-wave infra-red dull emitter fits most pet and reptile heaters that use Edison (E27) screw lamps.  It can be used with or without a reflector but if used without a reflector, care should be taken to prevent the animal from touching the emitter directly.

Rated at 250W,  240V

Ideal for night time heating of small or medium sized pet enclosures and vivariums.  Perfect for direct night time heating of cat’s and dog’s bedding area.

Dull Emitters are ideal for reptiles in general as they emit no light.  Most reptiles, including tortoises and turtles, can actually see more colours than humans can so any heat source that emits in the visible spectrum can be detremental during hours of darkness.  Where night time heat is required, Dull Emitters will provide long-wave infra-red heating without producing any of the visible spectrum.

MADE IN ENGLAND.  By buying this lamp you are supporting British Industry

The post 250W Infra-red FLAT Dull Emitter appeared first on Leisure Heating.

This long-wave infra-red dull emitter fits most pet and reptile heaters that use Edison (E27) screw lamps. It can be used with or without a reflector but if used without a reflector, care should be taken to prevent the animal from touching the emitter directly.

Rated at 150W, 240V

Ideal for nighttime heating of small or medium-sized pet enclosures and vivariums. Perfect for direct nighttime heating of cat’s and dog’s bedding area.

Dull Emitters are ideal for reptiles in general as they emit no light. Most reptiles, including tortoises and turtles, can see more colours than humans can so any heat source that emits in the visible spectrum can be detrimental during hours of darkness. Where nighttime heat is required, Dull Emitters will provide long-wave infrared heating without producing any of the visible spectrum.

MADE IN ENGLAND. By buying this lamp you are supporting British Industry

The post 150W Infra-red FLAT Dull Emitter appeared first on Leisure Heating.

Description

Pre-wired animal heater kit complete with a 1m chain and 2m supply lead with 13A plug. Designed to hang inside an enclosure with an included carabiner and a selection of two hooks for fixing the chain.

Please note that there is no reflector on this unit. Use a reflector if there is a chance the animal can climb and come into contact with a bare bulb. Reflectors to fit this lamp holder are available seperately.

The heating element will heat the animal directly without having to heat the air first. Heater lamps up to a maximum of 250W can be used with this kit.

The Edison screw lamp holder (E27) can accommodate a number of different types infra-red emitter including dull emitters, short-wave blown bulbs, PAR 38 lamps and normal screw fit GSL bulbs.

An optional metal reflector can also be used with this lamp holder.

Ideal for:

• Tortoises
• Reptiles
• Rabits
• In Zoos and Pet Shops
• Small fury animals
• Chicks

Product Specifications

• Voltage: 230V – 250V AC
• Lamp holder: E27 Max 250W
• Chain length: 1m
• Lead Length: 2m fitted with domestic 13A 3 pin UK plug

Made in England. By buying this product you are supporting British Industry.

The post Animal Heater E27 Lamp Holder and Chain Kit appeared first on Leisure Heating.

Description

Pre-wired animal heater that comes complete with a 1m chain and 2m pre-wired supply lead with 13A plug. It is designed to hang inside an enclosure with the included carabiner and a selection of two hooks for fixing the chain.

A reflector or guard must be used if there is a chance the animal can climb and come into contact with the bulb. (Reflector not included)

The heating element will heat the animal directly without having to heat the air first. The emitter produces 150W of long-wave infrared and NO light. Ideal for night-time heating of reptiles including tortoises and other animals that could be disturbed by the light output of short-wave lamps.

The heater features an Edison screw lamp holder (E27), this can also accommodate a number of different types of infrared emitter. These included short-wave blown bulbs, PAR 38 lamps and normal screw-fit GSL bulbs if required.

Ideal for none climbing pets including:

• Tortoises
• Small Reptiles
• In Zoos and Pet Shops
• Chicks

Product Specifications

• Voltage: 230V – 250V AC
• Lamp holder: E27 Max 250W.
• Lamp included: 150W Ceramic Dull Emitter
• Chain length: 1m
• Lead Length: 2m fitted with domestic 13A 3-pin UK plug
• Made in England. By buying this product you are supporting British Industry.

The post 150W Animal Heater with Ceramic Dull Emitter appeared first on Leisure Heating.

Description

This model comes complete with a 1m chain and 2m pre-wired supply lead with a 13A plug. It is designed to hang inside an enclosure. Also included is a carabina and a selection of two hooks for fixing the chain.

Please note that there is no ‘can’ type reflector on this unit. If there is a chance the animal can climb and come into contact with the bare bulb, a reflector and guard must be used.

The heating element will heat the animal directly without having to heat the air first. The emitter produces 250W of infra-red and a ruby light. Ideal for daytime basking.

Featuring an Edison screw lamp holder (E27), the heater can also accommodate a number of different types infra-red emitter including Dull emitters, short-wave blown bulbs, PAR 38 lamps and normal screw fit GSL bulbs if required.

Ideal for none climbing pets including:

• Tortoises
• Small Reptiles
• In Zoos and Pet Shops
• Chicks

Product Specifications

• Voltage: 230V – 250V AC
• Lamp holder: E27 Max 250W.
• Lamp included: 250W Ruby Spot.
• Chain length: 1m
• Lead Length: 2m fitted with domestic 13A 3-pin UK plug

The post 250W Basking Heater with Ruby Spot lamp appeared first on Leisure Heating.

Description – 

This versatile heater comes supplied with a Ceramic 250W Dull Emitter.

This model comes complete with a 1m chain and 1m pre-wired supply lead with a 13A plug. It is designed to hang inside the vivarium or enclosure.

The heating element will heat the animal directly without having to heat the air first. The dull emitter produces no light at all and emits long-wave infrared.

Featuring an Edison screw lamp holder (E27), the heater can also accommodate several different types of infrared emitter including short-wave blown bulbs, PAR 38 lamps and normal screw-fit GSL bulbs if required.

Ideal for:

• Small Reptiles
• Small Snakes
• Zoos and Pet Shops
• Garden Centres

Product Specifications

• Voltage: 230V – 250V AC
• Lamp holder: E27 Max 250W
• Lamp included: 250W Dull Emitter
• Chain length: 1m
• Lead Length: 1m fitted with domestic 13A 3-pin UK plug

The post 250W Vivarium Heater with Dull Emitter appeared first on Leisure Heating.

Description – 

This versatile heater comes supplied with a Ceramic 150W Dull Emitter.

This model comes complete with a 1m chain and 1m pre-wired supply lead with a 13A plug. It is designed to hang inside the vivarium or enclosure.

The heating element will heat the animal directly without having to heat the air first. The dull emitter produces no light at all and emits long-wave infrared.

Featuring an Edison screw lamp holder (E27), the heater can also accommodate several different types of infrared emitter including short-wave blown bulbs, PAR 38 lamps and normal screw-fit GSL bulbs if required.

Ideal for:

• Small Reptiles
• Small Snakes
• Zoos and Pet Shops
• Garden Centres

Product Specifications

• Voltage: 230V – 250V AC
• Lamp holder: E27 Max 250W
• Lamp included: 150W Dull Emitter
• Chain length: 1m
• Lead Length: 1m fitted with domestic 13A 3-pin UK plug

The post 150W Vivarium Heater with Dull Emitter appeared first on Leisure Heating.

Genuine ELSTEIN 250W Ceramic Long-Wave Dull emitter.

Used for many applications including food warming, plastics, animal heating and many other low-temperature applications.

Product Specification

• Voltage: 230V
• Wattage: 250W
• Size: Dia. 90mm x Height 120mm
• Cap:  E27

Applications

• Animal and Pet Heating
• Vivariums
• Food Warming
• Plastic Forming
• Vacuum Forming
• Paint Drying
• Plastics Softening

The post 250W Genuine ELSTEIN Infra Red Dull Emitter / Bulb E27 appeared first on Leisure Heating.

Genuine ELSTEIN 150W Ceramic Long-Wave Dull emitter.

Used for many applications including food warming, plastics, animal heating and many other low-temperature applications.

Product Specification

• Voltage: 230V
• Wattage: 150W
• Size: Dia. 90mm x Height 120mm
• Cap:  E27

Applications

• Animal and Pet Heating
• Vivariums
• Food Warming
• Plastic Forming
• Vacuum Forming
• Paint Drying
• Plastics Softening

The post 150W Genuine ELSTEIN Infra Red Dull Emitter / Bulb E27 appeared first on Leisure Heating.

Genuine ELSTEIN 60W Ceramic Long-Wave Dull emitter.

Used for many applications including food warming, plastics, animal heating and many other low-temperature applications.

• Product Specification
• Voltage: 230V
• Wattage: 60W
• Size: Dia. 70mm x Height 100mm
• Cap:  E27

Applications

• Animal and Pet Heating
• Vivariums
• Food Warming
• Plastic Forming
• Vacuum Forming
• Paint Drying
• Plastics Softening

The post 60W Genuine ELSTEIN Infra Red Dull Emitter / Bulb E27 appeared first on Leisure Heating.